Actisense Engine Management Unit Analog NMEA2000 Next Day Delivery

Description NMEA 2000 Engine Monitoring Unit – Analog to NMEA2000 Engine GatewayShare engine information on the NMEA 2000 bus.The Actisense EMU-1 is a specialized analogue to NMEA 2000 Gateway which converts data from analogue engine gauges/senders into NMEA 2000 data. The EMU-1 enables the sharing of engine data throughout the NMEA 2000 bus. It digitizes analogue engine sensors, enabling NMEA 2000 display devices to monitor the connected engine(s) on a vessel.The EMU-1 can monitor vital engine parameters such as temperature, pressure RPM and fluid levels from up to two engines.The EMU-1 has a PC-based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models.An Actisense PC to NMEA 2000 Gateway (NGX-1/NGT-1) is required to configure the EMU-1.The NGX-1 or NGT-1 must be used to update the firmware, connect the Toolkit and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGX-1 page and/or NGT-1 page for product details.Features:Enables analogue signals to be converted to NMEA 2000 messagesConvert signals from up to two engines (that share a common ground) with a single EMU-16 gauge / parameter inputs4 alarm inputs2 additional auxiliary inputs2 Tacho inputsCustomized IP65 caseDiagnostic LED’sWide power compatibility of 9 to 35VDCNo need to change an existing engineEasy installationEasy to configure to suit the connected engineConnect signals from fluid level gauges (that share a common ground with the engine) to NMEA 2000®Optional DIN rail mounting kit availableTotal engine hours are logged by the monitoring of engine Tach (RPM) inputTechnical Specifications:Power SupplySupply Voltage – 9 to 35VDCSupply Current – Typically < 25mA @ 12VDCSupply Protection – Continuous reverse polarity protection and load dump protection (meets SAE J1113)Supply Connector – Pluggable 2-way screw terminal, 3.5mm pitchSupply Voltage (NMEA 2000 Port) – 9 to 29VDCSupply Current (NMEA 2000 Port) – < 20mA @ 12VDC from NMEA 2000 busLoad Equivalent Number (LEN) – 1Supply Protection (NMEA 2000 Port) – Continuous reverse polarity protection and overvoltage protection to 40VNMEA 2000 Port – In/OutCompatibility – Fully NMEA 2000 certifiedGalvanic Isolation – 2500V input to ground, 1500V output to ground using ISO-DriveSpeed / Baud Rate – 250kbpsNMEA 2000 Connector – M12 male (A coded) connectorGauge InputsVoltage Range – 0 to 35VDCInput Impedance – > 50kΩSender Feed – 0, 4 or 18mAAccuracy – <= 2%Input Connector – Pluggable 6-way screw terminal, 3.5mm pitchInput Protection – Overvoltage protection to ±40VAlarm InputsVoltage Range – 0 to 37VDCInput Impedance – > 50kΩThreshold Voltage – Configurable, default is 5VAlarm Polarity – Configurable, default is alarm on low inputAccuracy – <= 2%Input Connector – Pluggable 4-way screw terminal, 3.5mm pitchInput Protection – Overvoltage protection to ±40VTacho InputsVoltage Range – ±3 to ±60VInput Impedance – > 100kΩ to groundInput Pulse Range – 4 to 50,000HzAccuracy – <= 1%Sender Compatibility – Ignition coil, alternator (“W”, “R” or “AC”) terminal, hall effect, VR or inductive senderThreshold – Automatically adjusts to signal levelInput Connector – Pluggable 4-way screw terminal, 3.5mm pitchInput Protection – Can withstand an ignition pulse to ±500VEngine LogEngine Hours – 2 separate engine hour logs internally connected to the tacho Inputs. Hours are logged when RPM is present, stored in non-volatile memoryMechanicalHousing Material – PolycarbonateProtective Lid Material – PolycarbonateSealing Materials – Expanded silicone foam gasket, closed cell polyurethane splash guard and ePTFE waterproof ventDimensions – 127mm (L) x 112mm (W) x 48mm (H)Weight – 250gMounting – 4 x 3.5mm lugs to allow panel mount with self tapping s/s screws (included), optional DIN Rail mount available on requestApprovals and CertificationsEMC – EN 60945 (sections 9 & 10)Environmental Protection – IP66 (PCB housing)Operating Temperature – -20°C to 55°CStorage Temperature – -30°C to 70°CRecommended Humidity – 0 – 93% RHGuarantee – 3 yearsThis product may not be returned to the original point of purchase.Please contact the manufacturer directly with any issues or concerns. Specifications:Cable Length (Feet): N/AData Interface: NMEA 2000Box Dimensions: 3″H x 6″W x 9″L WT: 1 lbsUPC: 5060998710331Owner’s Manual (pdf)Brochure (pdf).embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }